UNITISED CURTAIN WALL INSTALLERS — LONDON & UK.
Factory-glazed unitised facades for high-rise
Delta Facades are unitised curtain wall installers delivering high-rise residential, commercial and mixed-use facades across London and the UK. Unitised curtain wall panels are assembled in a factory, glazed under controlled conditions and craned into position storey by storey on site — the standard for tall buildings, tight programmes and demanding weather performance.
Delta Facades are specialist curtain wall installers and fitters, working for main contractors across London and the UK on an installation-only basis. Curtain Wall Installers & Fitters UK →
Our unitised teams install at the rate the programme demands — 100+ m² per shift on well-organised sites is routine — with full crane, MEWP and mini-glazing-robot cover. Every panel is set out against verified survey data, pre-glazed to factory tolerance, and set on site by NVQ-qualified installers supervised by SMSTS managers, lift supervisors and slingers. We work with Schüco UCC 65 and USC 65, Reynaers CW 86-EF, Kawneer 7250, and bespoke fabricator-led unitised systems.
Delta Facades operates as a specialist installation subcontractor across London and the United Kingdom. Our unitised curtain wall teams are NVQ-qualified, CSCS-carded installers managed by SMSTS-certified site managers, with full lift supervisor and slinger cover on every package.
WHAT WE BRING TO UNITISED CURTAIN WALL PACKAGES.
Speed of installation
Pre-glazed units lift directly from the wagon onto the structure — enclosure rates of 100+ m² per shift are standard on well-organised sites.
Factory quality control
Glazing, sealing and weather testing happen in controlled conditions rather than at 80 metres on a windy day — defect rates fall sharply.
High-rise capability
Superior wind and water performance, designed to accommodate inter-storey and thermal movement over the full building height.
Reduced site footprint
Less material storage, fewer trades at height and faster enclosure — safer programmes and lower preliminaries.
UNITISED CURTAIN WALL IN ACTION.
UNITISED CURTAIN WALL
QUESTIONS.
What's the difference between stick and unitised curtain walling?+
Stick is assembled piece by piece on site; unitised arrives as complete factory-glazed panels that are craned into place. Unitised is faster and higher quality but needs crane access and repetitive geometry; stick suits complex or one-off elevations. Full comparison in our guide.
How high can unitised curtain walling be installed?+
There is no practical ceiling — unitised is the default for towers above 8–10 storeys and we regularly install to 20+ storeys. Panels are designed for inter-storey movement and tested to bespoke wind loads.
Are you a Schüco Approved Installer?+
Yes — Delta Facades installs Schüco UCC 65, USC 65 and related unitised systems and our teams train through the Schüco Academy in Milton Keynes.
Are Delta Facades curtain wall installers and fitters?+
Yes. Our directly employed crews are curtain wall installers and fitters for main contractors nationwide. We are installation-only: we install systems from the UK's leading manufacturers and do not manufacture or supply them.